MBE / HUB-Certified Texas MEP
National Franchise Build-Out MEP Engineering in Arlington, Texas
Pyra Engineering delivers sealed MEP for franchise locations across Arlington and the wider Texas metro. We're MBE/HUB-certified, TBPE-registered, and write to the codes the Arlington AHJ actually enforces — not the generic version.
What we deliver for franchise locations in Arlington
- Brand prototype review and Texas-code adaptation
- Site-specific HVAC sizing for local climate
- Electrical service coordination with utility
- Equipment-specific gas, water, and drain rough-in
- Lighting per brand standard plus IECC compliance
- Restroom plumbing per IPC and TAS
- Sign electrical coordination
- Permit comment turnaround within franchise schedule
Recent franchise locations work — Texas portfolio, anonymized
- franchise location — 3007 sf — M/E/P scope — Houston (City of Houston / Houston DSD) — IBC/IMC/IPC/IFC 2021, NEC 2023, IECC 2021, Houston Code Ch. 26, ASCE 7-22 — completed 2025. HVAC (comfort + code compliance); Electrical (distribution, short-circuit, suspended transformer)
- national QSR burger chain — Mont Belvieu, TX — M/E/P scope — City of Mont Belvieu — IBC/IMC/IPC/IFC 2021, NEC 2020, TAS
- franchise location — M/E/P scope — City of Holladay — IBC/IMC/IPC/IFC 2021, NEC 2020, TAS
- franchise location — Austin, TX — M/E/P scope — City of Austin — IBC/IMC/IPC/IFC 2021, NEC 2020, TAS
- franchise location — TX — M/E/P scope — City of Draper — IBC/IMC/IPC/IFC 2021, NEC 2020, TAS
Project descriptions are anonymized. Pyra Engineering does not publish client names or contract values.
Arlington permit notes
City of Arlington Community Development & Planning reviews MEP.
Frequently asked questions
Does Pyra Engineering design fire alarm or sprinkler systems?
No. Fire alarm system design and installation is the fire alarm vendor's scope. Sprinkler design is the fire-protection contractor / FPE scope. Pyra Engineering's scope is mechanical, electrical, and plumbing (MEP) only — we coordinate locations and conduit notes for FA/sprinkler tie-ins on our drawings, but we do not stamp those designs.
Do I need a sealed Texas engineer for a franchise location project in Arlington?
For most franchise locations of any meaningful size, yes. Texas Occupations Code §1001 requires MEP designs above certain thresholds to be stamped by a licensed Texas Professional Engineer. Drawings without a TX seal can stall plan review or trigger code-enforcement action. Pyra Engineering is a Texas-licensed firm; the drawings we deliver are stamped and ready for Arlington permit submittal.
What's typical turnaround on MEP drawings for a franchise location in Arlington?
Standard franchise location fit-outs run 2–4 weeks from kickoff to permit-ready package, depending on scope and how quickly architectural backgrounds settle. Fast-track schedules are doable when we surface the deadline at quote — we have a separate workflow for franchise-rollout pace and developer-deadline pressure.
Will Pyra Engineering stamp drawings done by a contractor or designer?
We perform an engineer-of-record review before stamping any third-party drawings. If the design is sound, we mark up the corrections needed and stamp once they're incorporated. If it isn't, we'll tell you up front rather than stamp something we don't stand behind. Stamping fees are scoped to the review effort.
Does the MBE/HUB certification benefit me on a Arlington project?
Yes if you're tracking diversity-spend goals on public-sector or large corporate projects. Pyra Engineering's HUB and MBE certifications count toward those goals; many City of Houston, county, and Fortune-500 supplier-diversity programs accept them. Bringing us in lets you both meet the goal and get the engineering.
How does Pyra Engineering quote franchise locations MEP design?
Fixed fee based on conditioned area, scope (full MEP vs. discipline-specific), and project type (shell, TI, or ground-up). Quotes typically come back within one business day of receiving the architectural set or a one-paragraph scope summary. No estimates without scope — we don't do range pricing that creeps.
Brand drawings vs Texas-code drawings — what do you do with them?
Adapt, don't replace. We take the brand prototype, mark it against TX code (IBC/IMC/IPC/IFC/NEC), and produce a stamped TX version. Brand keeps the look; the AHJ gets the seal.
Brand prototype made elsewhere — will Arlington accept it?
Not as-is. Other states' codes don't satisfy TX adoption. Pyra Engineering re-runs the calcs against the TX-adopted edition and stamps it.
Do you stay within the franchise schedule on permit comments?
Yes — we treat franchise schedules as hard. Most national rollouts run 1–2 cycles in Arlington; we hit that by writing first submittals to local amendments.
Sign electrical for franchise locations — your scope?
Yes — service to the wall pack disconnect or pole base, sized per the brand sign spec.
Code edition for Arlington?
2021 IBC/IMC/IPC/IFC + NEC + IECC 2021.
Energy code for franchise?
IECC 2021 + ASHRAE 90.1-2019. Brand may have additional energy requirements; we comply with both.
Restroom requirements?
Per IPC by occupancy class. Most franchise locations have specific brand requirements (single-occupant, family, etc.).
HVAC for franchise — packaged RTU?
Yes typically. Sized per brand spec or our load calc. We coordinate roof penetration with structural.
Permit cycle?
1–2 cycles for established brands; 2-3 for new prototypes.
Fire alarm tie-in?
Per landlord building if multi-tenant. For freestanding, we design full FA system.
Lighting per brand standard?
We follow brand lighting spec but document IECC compliance via COMcheck.
Construction administration?
Yes — typically faster CA scope given brand standardization.
Cost premium vs custom design?
Lower than custom because the brand prototype does much of the design work. Our adaptation fee is leaner.
Do you handle equipment-specific gas, water, drain rough-in?
Yes — per equipment cut sheets supplied by brand or owner.
TAS / TDLR for franchise?
Most franchise TIs trigger TDLR. Brand drawings often need TAS adaptation.
Brand-specific signage circuit?
Yes — per brand sign vendor's spec. We provide service capacity.
Multi-store rollout — bulk pricing?
Yes — we offer rollout pricing for 5+ stores in similar markets.
Do you stamp out-of-state franchise?
TX and FL only; partner engineers for other states.
How do you handle brand-mandated equipment that doesn't meet TX code?
We flag at scope review. Either brand provides TX-code-compliant alternate or we work with AHJ for variance.
Construction admin scope?
Standard — site visits, RFI response, brand equipment startup verification.
Open: Texas Tenant Fit-Out MEP Schedule Risk Survey (Q2 2026)
We’re surveying 100+ Texas GCs, architects, and developers on what actually breaks tenant fit-out MEP schedules — and what predicts the projects that stay on time. If you’ve shipped two or more TX commercial fit-outs in the last 12 months, your data would help.
Take the 5-min survey → · respondents get an early preview of the findings before public release.
Need MEP for a franchise location in Arlington?
Send the architectural set or a one-paragraph scope and we’ll quote within one business day.