Do I need a P.E.-stamped MEP set for a tenant fit-out in Waco?

In most cases, yes. Texas Occupations Code 1001 requires MEP designs above certain thresholds to be sealed by a Texas-licensed Professional Engineer, and unsealed drawings can stall plan review. Pyra holds TBPE firm registration F-22556.

How much does commercial MEP design cost in Waco?

MEP design fees generally fall between roughly $0.50 and $3.00 per square foot, or about 2 to 8 percent of construction cost, driven mainly by equipment density and complexity. A restaurant with a Type I hood, gas piping and a grease interceptor sits at the high end; an open-plan office fit-out sits at the low end. Pyra quotes fixed fees rather than percentages.

What most often delays a commercial fit-out in Waco?

Utility and shell-system constraints rather than design. When a change of use pushes the connected load past what the existing transformer and service can carry, the resulting service upgrade moves onto the utility engineering queue, and distribution transformer lead times have run long through 2026. Run the connected-load calculation against the new program before design freezes.

Can an out-of-state engineer seal drawings for a permit in Waco?

Not unless they hold a Texas P.E. license and their firm holds the required firm registration in Texas.

Who pays for MEP engineering, the landlord or the tenant?

On a tenant fit-out it is usually the tenant, often reimbursed through a tenant improvement allowance. The lease governs it, and allowances sometimes exclude design fees entirely.

How fast can I get an MEP quote for a Waco project?

One business day on standard scope. Send the architectural set, equipment cuts if available, and a paragraph describing the work.

Does Pyra design fire alarm or fire sprinkler systems?

No. Those are separate licensed scopes handled by fire alarm and fire protection contractors. Pyra coordinates with them but does not perform that design.

Does Pyra handle construction administration?

Yes, and the same engineers who produced the drawings handle it: submittal review, RFI responses and site observation.

Home · Texas · Waco

MBE / HUB-Certified Texas MEP

MEP Engineering in Waco, Texas

Pyra Engineering delivers sealed mechanical, electrical, and plumbing engineering for commercial projects across Waco and the surrounding Texas metro. We’re MBE/HUB-certified, TBPE-registered, and write to the codes the Waco AHJ actually enforces. Pick the building type below to see scope, code references, and recent Waco-area work.

Building types we serve in Waco

Restaurants
Medical offices
Offices
Retail tenants
Industrial facilities
Hospitality projects
Residential projects
Office-warehouse buildings
Mixed-use developments
Schools
Institutional facilities
Religious facilities
Dental offices
Manufacturing facilities
Franchise locations

Waco permit notes

City of Waco Inspection Services reviews MEP.

Published: The 2026 Texas Commercial MEP Field Report

We surveyed Texas GCs, architects and developers and analysed 374 sealed commercial projects to find what actually breaks tenant fit-out MEP schedules — and what predicts the projects that stay on time. The findings are published and free to read.

Read the field report →

Have a Waco project in mind?

Send the architectural set or a one-paragraph scope and we’ll quote within one business day.

Get a quote

Waco, TX

MEP Engineering in Waco, Texas

Building types we serve in Waco

Waco permit notes

Published: The 2026 Texas Commercial MEP Field Report

Have a Waco project in mind?

Other Texas cities we serve

Login